MGS30 DN125

Bourdon tube “solid-front” pressure gauges turret case DS 4.5” (125 mm)

These instruments are built in conformity with the construction and safety specifications of ASME B40.1.
In case of leaks or break of the elastic element the operator is protected by a stainless steel safety cell solid front and by the blow-out back. They are usually used in the chemical, petrochemical industries and in conventional power plants. The TIG welding between the safety cell and the process socket strengthens the instrument and assures a better tight in case of dampening fluid The advantages of filling the case of the instrument with a dampening fluid are: reduced pointer fluctuation, reduced wear of rotating parts of the movement when pulsant vibrations and pulsations occur. Moreover condensation and corrosive atmospheres which could damage the internal parts.

Teollisuuden ala:
  • Kemia, Petrokemia
  • Energia
  • Öljy ja kaasu
  • Konerakennus (OEM)
  • Suunnittelu, hankinta, rakentaminen
Instrumenttityyppi:
  • Painekaarellinen painemittarit
Käytön ehto:
  • Tärinä
  • HAPPI-versio
  • Alipaine
  • Yhdistetty (alipaine + paine)
  • Sykkivä paine
Sääntöjen mukaisuus:
  • ASME B40.1
Tarkkuus:
  • 2A standardin ASME B40.1 mukaisesti
  • 0,5 % FSV:stä
Toiminta:
  • Paikallinen näyttö
Materiaalit:
  • Kaikki ruostumatonta terästä
Alue:
  • 0...15 / 0...30000 psi ja alipaine
Suojausluokka:
  • IP 55, IP 67
Työpaine:
  • 100% FSV:stä

MGS9/2B

“Continuous duty” diaphragm seal, welded, with...

MGS9/367

Diaphragm seal for DS 2. 5” (63mm) pressure...

MGS9/SA

Sanitary diaphragm seal threaded process connection...

MGS9/3A

Back side diaphragm seals, with flanged connection

MGS9/3B

Back side diaphragm seals, with flanged connection

MGS9/4

"In line" diaphragm seal, with flanged connection

MGS9/6

Back side diaphragm seals, with flanged connection

MGS9/7

“Continuous duty” diaphragm seal, welded, with...

MP5

Pig tails and siphons

BSM/M2

Bar stock two- valve manifold, block and bleed

MGS9/111

Back side diaphragm seals, with threaded connection

MGS9/1A

Back side diaphragm seal for high pressure, with...

MGS9/1B

Diaphragm seal with threaded connection

MGS9/AL

Clamp connection diaphragm seal

MGS9/P

Plastic diaphragm seal, with threaded connection

MP4/9

Adjustable overload protection device

BSV/VV-

Bar stock needle valve, block and bleed

BSV/VM-

Bar stock needle valve, block, multiport

MP3

Cocks and valves

Nimi Tyyppi Lataa
Data Sheet MGS30 DN125 Data sheetitenesptdefrru
Mounting MGS30 Manuaalinenitenes
User guide MAN Manuaalinenitenesptfrru
19010_RC3_Available Ranges_p1 Yleinenitenesptdefrru
Threaded Process Connection Yleinenitenesptdefrru
Mounting Yleinenitenesptdefrru
RoHS Conformityiten
PED Conformityiten